This is used for mould remediation, to prevent deterioration of wooden surfaces and also to assist in removing old paint and varnish.

Type: Water based antiseptic concentrate
Purpose: Use on wooden surfaces with good absorption for the purpose of protection of surfaces from mould, fungi, algae and for colour restoration. Can also be used on any porous surface (concrete, brick, etc).

Properties: Kills micro-organisms, surface cleaning, helps remove old paint and varnish, easy to use, after use the surface may be painted or revarnished.
Structure: active oxygen, polymeric biocide, solvent = water. pH4.1
Density = 1.1g/cm³
Packing: 0.33l, 1l, 3l, 5l, 10l
Colour=transparent/yellowish

Safety precautions: Keep away from children. Do not inhale. Avoid contact with eyes and skin. More detailed information can be found on the MSDS sheet.
Storage: The bottle should be kept airtight. Period of storage = no more than 3 years.
Waste disposal: Dispose of as normal household waste. Do not pour down drain or into natural water courses.

Substrates: wooden structures should be dry, clean and possess absorbing ability.
Preparation of substrate: sand in direction of grain to remove all surface deposits. Old wood should be sanded more rigorously to reveal healthy wood.

Processing: apply by brush or spraying at 150ml/m². Optimal protection is a 250ml/m².
Temperature of processing: 10 degrees Celsius (recommended between 25-30 degrees.
Drying: at 25 degrees. Partial drying occurs at 45 minutes for the first layer. 2nd layer approximately after three hours. Full polymerisation after 5 hours.

Consultations: We can answer any questions regarding this technology and would advise you to contact us.